published research
research | writer |
Numerical modeling and investigation of a wavy absorbent solar collector | Dr.Ahmed H.Jassim |
The impact of gas pressure and current on the hardness behaviour of Tig welding stainless stee | Dr.Iqbal Abdullah Rashid |
Characterization of wear and fatigue behavior of aluminum piston alloy using alumina nanoparticles |
Dr.Iqbal Abdullah Rashid Haitham Mohammed Ibrahim Uday Awad Abtan |
Do high-viscosity bulk-fill composites polymerize sufficiently at deep layers | Dr.Iqbal Abdullah Rashid |
Influence of the mold type on the mechanical properties of the piston alloy with Nano alumina in casting and metal mold |
Haitham Mohammed Ibrahim Dr.Iqbal Abdullah Uday Awad Abtan |
MICROSTRUCTURE VARIATION EFFECTS INFLUENCE ON CHARACTERISTICS AND MECHANICAL PROPERTIES OF MONEL 400 AND LOW ALLOY STEEL (ASTM 387-Gr.11) GTAW DISSIMILAR JOINT |
Dr.Ahmed Ghazi Abdulameer muhammad sabeeh |
Preparation and Characterization of Nickel Oxide for Antibacterial Properties | Ahmed Salman |
An NMOS transistor - based high - gain operational amplifier designed in 0.25 - micron CMOS technology | Ahmed Salman |
Microstructure and Mechanical Properties Assessments of 304 Austenitic Steel and Monel 400 Dissimile GTAW Welment |
muhammad sabeeh Uday Awad Abtan |
Influence of Water-In-Fuel (Diesel and Biodiesel) Emulsions on the Performance and Emis Characteristics of a Single-Cylinder Diese | Dr.Hasanain Adnan Abdul Wahhab |
Survey to Water-In-Diesel Emulsion Characteristics as an Alternative Fuel for CI Engine | Dr.Hasanain Adnan Abdul Wahhab |
Investment of Blending Biofuels and Nanoparticles with Conventional Diesel Fuel to Improve Combustion Process—A Review | Dr.Hasanain Adnan Abdul Wahhab |
Influence of Twisted Tape Inserts with Perforation on Heat Transfer and Pressure Drop Inside Circular Tube: Numerical and Experimental Investigation | Dr.Hasanain Adnan Abdul Wahhab |
Comparative Assessment of Friction Head Losses in Pipe Flow | Dr.Hasanain Adnan Abdul Wahhab |
Transient study of thermal stratification of full-scale chilled water storage tank during optimum discharge condition | Dr.Hasanain Adnan Abdul Wahhab |
Enhancement Heat exchanger performance by insert dimple surface ball inside tubes: A review | Dr. Hasanain Adnan Abdul Wahhab |
Performance Analysis of an Open-Flow Photovoltaic/Thermal (PV/T) Solar Collector with Using a Different Fins Shapes | Dr.Hasanain Adnan Abdul Wahhab |
Impact of Nano Additives in Heat Exchangers with Twisted Tapes and Rings to Increase Efficiency: A Review | Dr.Hasanain Adnan Abdul Wahhab |
Parabolic Air Collectors with an Evacuated Tube Containing Copper Tube and Spiral Strip, and a New Cavity Receiver: Experimental Performance Analysis | Dr.Hasanain Adnan Abdul Wahhab |
Exergo–Economic and Parametric Analysis of Waste Heat Recovery from Taji Gas Turbines Power Plant Using Rankine Cycle and Organic Rankine Cycle | Dr.Hasanain Adnan Abdul Wahhab |
Influence of Swirl Flow Pattern in Single Tube Burner on Turbulent Flame Blow-Off Limit | Dr.Hasanain Adnan Abdul Wahhab |
Effects of Nozzle Diameter and Number of Carbon Atoms in Fuel on Flame Quenching in Counter Burner | Dr.Hasanain Adnan Abdul Wahhab |
NUMERICAL THERMAL ANALYSIS OF RE-ENTRY APOLLO MODEL AS-202 AT HIGH ANGLE OF ATTACK | Dr.Laith Jaafer Habeeb |
Studying the best performance of the CPU thermal conductivity chemical material with the lowest possible deformation | Dr.Laith Jaafer Habeeb |
Enhanced Performance of Structurally Optimized Plate-Fin Heat Exchangers Through Numerical Modeling of Heat Transfer and Pressure Drop | Dr.Laith Jaafer Habeeb |
Experimental study of flow pattern transition in a two-phase flow at rectangular channel | Dr.Laith Jaafer Habeeb |
Comprehensive study of cooling techniques for leading edge of modified gas turbine blade | Dr.Laith Jaafer Habeeb |
Numerical and experimental study of flow around a golf ball with dimples by Laser-Doppler anemometer technique | Dr.Laith Jaafer Habeeb |